The Ntron Model 3100 provides an affordable and versatile Oxygen Analyzer solution for a variety of applications including semiconductor manufacturing and solder/re-flow furnaces. The unit provides high-purity gas measurement in a range of 0.3ppm to 100% and super fast response time of air to ppm 02 in less than 10 seconds.

A small footprint and compact size makes the Ntron 3100 easy to install. The unit’s expected operational life is five to ten years.

The low-maintenance, long-life Zirconia sensor has virtually unlimited shelf life and will not dry out or freeze.

Learn more:
The Zirconia Sensor Advantage

Sensor: Rapid Response Zirconia Sensor/Remote Mount

Measurement Range: 0-10PPM/0-100PPM/0-1,000PPM/0-10,000PPM/ 0-100% auto range or fixed range

Display: 19.05mm LED digital display, Color-coded LEDs for system status, Alarms 1&2= RED, system fault= YELLOW, OK and online= GREEN

Response Time: <10 sec. to PPM from air

Intrinsic Error (accuracy): At constant temperature: ±2% range

Over operating temperature: ±5% range When calibrated @ target concentration @ STP: ±1% range
Operating Temperature – 5 to 45º C

Signal Interface: RS-232 service port, 4-20mA negative ground, 0-10VDC range ID and choice of 0-1VDC, 0-5VDC or 0-10VDC analog oxygen signal

Alarm Outputs: Two alarms with adjustable form C relay outputs. Configurable for fail-safe or fail-alarm mode, ascending or descending trip. One system fault relay. One alarm/relay for sensor heater OK.

Sample Port: 1/8” compression type fittings on remote sensor module

Electrical Connections: Removable terminal blocks on back of analyzer

Power, Analyzer: 5W at 115/230VAC 50/60Hz, single phase

Environmental Ratings, Analyzer: Faceplate: IP66
Housing: IP20

Warranty: Electronics and sensor: One year

Weight: Analyzer: 1 kg

Features:
	Compact size
	Zirconia Sensor
	Fast response time